01-21-2004, 05:53 PM
It all depends on the LNB that is on the dish. If it's a single LNB with one wire, it will only work with one reciever. Period. It doesn't matter what kind of splitter/ switch you have because the DTV signal is spread across 2 channels and if your using signal A with the first reciever, the second reciever will only be able to surf the A signal. The channels on the B signal will be all blacked out.
Buy a Dual LNB at radio shack and replace it with the one mounted on the dish. Then run a second wire to the tivo reciever thus having 2 signals. And if you have more recievers in the house you will have to buy a Multiswitch and wire everything through that.
Buy a Dual LNB at radio shack and replace it with the one mounted on the dish. Then run a second wire to the tivo reciever thus having 2 signals. And if you have more recievers in the house you will have to buy a Multiswitch and wire everything through that.
<center><a target="_BLANK " href="http://duffgardens.com/msgboard.mv">![[Image: bunker.jpg]](http://duffgardens.com/bunker.jpg)
</center>
</center>