Posts: 1,592
Threads: 55
Joined: Jan 2002
Reputation:
0
Don't do this if you really care about efficiency and a nice setup. Getting a router is so much easier and less of a pain in the ass.
<center>
![[Image: planecrash.jpg]](http://pinkorag.homestead.com/files/planecrash.jpg)
</center>
Posts: 230
Threads: 26
Joined: Mar 2002
Reputation:
0
AM, I don't have that option because I have a USB modem. What else do you suggest?
Posts: 3,491
Threads: 147
Joined: Mar 2002
Reputation:
0
I agree with AM, buy a router/gateway. They're cheap now, and really easy to setup.
Plus, you can get a hub w/ built-in router for around $100 or less.
Posts: 230
Threads: 26
Joined: Mar 2002
Reputation:
0
From what I understand, there is only 1 router that hooks up to a USB modem... and it's only had very limited testing. Supposedly, it's only been tested with about 3 different types of modems... meaning, success with it isn't too good.
Edited By Ahlexus on April 09 2002 at 9:51
Posts: 3,491
Threads: 147
Joined: Mar 2002
Reputation:
0
ugh! I didn't realize you had a USB modem. Next thing, you'll tell us you use a laptop, too. (vs. a desktop pc)
Posts: 157
Threads: 7
Joined: Jan 2002
Reputation:
0
k, before u do ANYTHING, get a NEW FUCKING MODEM... usb modem = teh suck
Posts: 230
Threads: 26
Joined: Mar 2002
Reputation:
0
Kid, I actually have 4 pcs (only one is a laptop and that's not what I'm using). What I want to do is hook up an older pc that is located behind me.
Hummer, I'll ask bf if that is an option.
Posts: 3,491
Threads: 147
Joined: Mar 2002
Reputation:
0
With your USB modem, and Internet Connection Sharing, you could install a Network Card in the machine with the modem. This network card could then be connected to a hub, and would then provide the rest of your network with a shared internet connection. The only drawback is that the machine with the modem would have to be ON in order for the others to have a connection. This is a simple and cheap solution, but some don't like the fact that one machine has to be on.
Short of doing this, a new modem and a hub with built-in router would be the best solution.
Posts: 230
Threads: 26
Joined: Mar 2002
Reputation:
0
Kid, thanks a lot for the information. I will take a closer look at what can be done this weekend. I do know we installed a network card in the other pc but there was an equipment compatibility problem.
I do appreciate all your help though.
Posts: 268
Threads: 6
Joined: Jan 2002
Reputation:
0
does you modem have a network cable hookup??or does it only have usb
Posts: 1,592
Threads: 55
Joined: Jan 2002
Reputation:
0
There are dongles that convert usb and ethernet. I'm not sure however if they are only one way or the other.
<center>
![[Image: planecrash.jpg]](http://pinkorag.homestead.com/files/planecrash.jpg)
</center>
Posts: 16
Threads: 0
Joined: Mar 2002
Reputation:
0
With our old compute Sygate served us well….when I upgraded to a newer computer I also escalated to a router and that works out better. I guess it depends on what level of performance you’re willing to settle for. IMO Sygate will do OK for the great unwashed masses……
Posts: 230
Threads: 26
Joined: Mar 2002
Reputation:
0
I really appreciate all the help you've given me on this. I worry that if I do use Sygate I'll lose some performance on the pc I'm using. :confused:
Posts: 268
Threads: 6
Joined: Jan 2002
Reputation:
0
you will lose some performance but most likely it wont be a significant loss :confused:
Posts: 16
Threads: 0
Joined: Mar 2002
Reputation:
0
Just go ahead and install Sygate……I really don’t think you’ll be disappointed.
Posts: 230
Threads: 26
Joined: Mar 2002
Reputation:
0
Thanks Bartman and Lord... and everyone else too. You guys have been great :thumbs-up: